Components and tools

You need these components and tools to build the entire sensor unit

Necessary tools

Wire stripper
Stripping pliers
Cutter knife
Cutter knife
Thread cutter
Tap tap
Soldering-iron
Soldering iron
Screwdriver
Screwdriver cross
T20H Bit
Screwdriver T20H
Side-cutters
Page cutter
Pointed pliers
Pointed pliers
Hot air gun or lighter
Hot air gun or lighter

Necessary components

Housing total
Housing (115 x 90 x 55 mm)
Lasercut feet
Lasercut feet (3mm thickness)
Lasercut baseplate
Lasercut base plate (3 mm thick)
Mounting plate
Lasercut mounting plate (5 mm thick)
3D print mount for radar module
Radar bracket
2x Velcro strap 2cm x 30cm
2x Velcro strap (2 x 30 cm)
Velcro Velcro strap
Velcro hook and loop tape (18 cm)
Akku-Pack
Battery pack
Ladebuchse
Charging socket (+plug)
Button cell CR2032
Button cell CR2032
Button cell holder
Button cell holder
Radarmodul
Radar module
Header 4-Pin
Header 4-Pin
Header 6-Pin
Header 6-pin
Cable (4cm)
Cable (4cm)
Audioshield
Audioshield
MicroSD card
MicroSD card
Teensy 4.0 developer board
Teensy 4.0 developer board
40-Pin-Leiste
40-pin bar (already shortened here)
2-wire cable
2-core cable (4cm)
Charging regulator
Charge controller
Schrumpfschlauch
Shrink tubing (1 cm)
Voltage transformer
Voltage transformer
Screws inside
9 screws M3x5mm
Safety screws
4 safety screws M4x20mm
Safety screws
4 cylinder head screws M3x14mm
Previous step Next step